Founders Village sits east of downtown Castle Rock along Founders Parkway and Ridge Road, and it is where much of the town's 1980s and 1990s growth landed. The first homes went in around 1983, the median house dates to the late 1990s, and the streets are a mix of split-levels, two-stories, and ranches with three to five bedrooms, picket fences, and basements that were unfinished on the day of closing and finished sometime in the twenty years since.
Age matters in a water loss. A 1990s house here has its original water heater or its second, a pressure-reducing valve on the front wall that may not have been touched, polybutylene or early PEX in some walls, and a sump pump that has cycled through thirty springs of snowmelt. When something lets go, it lets go over a finished basement.
This site connects homeowners in Founders Village with an independent local water damage provider by phone. The provider looks at the house, meters the basement, and sets the scope from the readings.
A tank that rusted through beside the furnace is water heater leak cleanup, and the framed wall to the finished room is metered before anything is cut. A pit that overflowed after the pump's float stuck is sump pump failure cleanup. Once the water is out, structural drying runs until the pad, the plate, and the drywall read dry.
The Founders Village Metropolitan District maintains the parks, the pool, and the common landscaping for the neighborhood and posts its board meetings online. Water service and rebuild permits are the Town of Castle Rock's, since the neighborhood is inside town limits.
Call (303) 647-9733 and tell us what you found. We put you through to a local water damage provider serving Founders Village.
Water pumped out of a finished Castle Rock basement, then carpet pad, drywall, and framing metered to see what dries and what comes out.
Cleanup after a pit overflowed during snowmelt or a power outage, with the basement floor, walls, and stored contents dried on a plan.
Water cleanup after a supply line froze and split in a garage wall, an attic run, or a hose bib, then dried what the thaw soaked.
Standing water pulled off basement slabs, wood floors, and carpet with truck-mounted extractors before the drying equipment goes in.
Air movers and dehumidifiers run by moisture readings until subfloor, studs, and drywall reach their dry target in thin Front Range air.
The floors, ceilings, and finished rooms a failed supply line reached, extracted and dried once the main is closed.
Wet attic insulation, ceilings, and walls dried out after hail, wind, or a spring snow load opened a path through the roof.
A tank that let go in a basement utility room or garage, and the flooring, drywall, and stored boxes it soaked.